Telefunken TX100 User Manual page 83

Answering machine messages have the wrong date and time
- Have you manually set the date and time?
Cannot access your messages from another phone
- Have you changed the remote access security PIN code?. Always keep a note of the new PIN
code in a safe place.
- Has remote access been disabled?
- Make sure you are calling from a touch-tone telephone. When dialing a number, there should be
tones. If there are clicks, then it is not a touch-tone telephone and cannot activate the answering
machine.
- The answering machine might not detect the remote access code when your announcement is
playing. Wait until the announcement is over before entering the code.
- There might be interference on the telephone line you are using. Press the dial pad keys firmly
when dialing.
No Caller number/name displayed
- Have you subscribed to Caller ID service?
- The caller may have blocked their number.
- An exact name/number match was not found in your phonebook. Check that you have stored the
complete number including area code.
- The caller might not be calling from an area which supports Caller ID.
Both you and the caller's telephone companies must use equipment compatible with the Caller ID
-
service.
- The Caller ID information shows after the first or second ring.
Base unit does not ring, but the lights are on
- Have you connected the telephone line correctly?
- Is the base ringer set to off?
- You may have a faulty line or socket. Try using another socket.
Buzzing noise on my phone or on other electrical equipment nearby
- Sometimes your TELEFUNKEN TX 1** can interfere with other electrical equipment if it is placed
too close. It is recommended that you place your TELEFUNKEN TX 1** at least one metre away
from electrical appliances or metal obstructions to avoid any risk of interference.
- If you have an ADSL internet service ensure correct filters are installed to prevent interference.
10. WARRANTY
TX Bluetooth 83