To Transfer A Call From The Headset Back To The Handset; To End A Call That Started At The Handset; Earpiece/ Handsfree Volume; Hold Function - Telefunken TX100 User Manual

Press MENU/OK twice to select Use headset.

To transfer a call from the headset back to the handset:

Press MENU/OK twice to select Use handset.

To end a call that started at the handset:

Press OFF or put the handset in the telephone base or charger.
Note:
If you answer a call using a headset, and you lose the Bluetooth connection or the battery is
depleted, the call will be lost.
If you are using a headset for a call which is transferred from TELEFUNKEN TX 1** handset,
and you lose the Bluetooth connection or the battery of the headset is depleted, the call will be
transferred back to the originating handset.

Earpiece/ handsfree volume

Press UP/DOWN to adjust the listening volume of the earpiece or loudspeaker when during a call.
Note: The handset earpiece volume setting (1-5) and speakerphone volume setting (1-6) are
independent.
When the volume reaches the minimum or maximum setting, you will hear two beeps.
D. Hold function
You can place a home or mobile call on hold.
You will hear an alert tone if you have not taken the call on hold after 14 minutes.
You will hear another alert tone 30 seconds later.
At 15 minutes on hold, the call on hold automatically disconnects.
To place a home call on hold:
Press HOLD. The handset displays Home call on hold and HOME flashes.
To resume a home call on hold:
Press HOME.
To place a mobile call on hold:
Press HOLD. The handset displays Mobile call on hold and MOBILE flashes.
To resume a mobile call on hold:
Press MOBILE
E. Mute function
Use the mute function to turn off the microphone. You can hear the caller, but the caller does not
hear you.
TX Bluetooth 64