Using The Home And Mobile Lines Together; Register An Additional Handset; De-Register A Handset - Telefunken TX100 User Manual

Using the home and mobile lines together

You can be on two different calls using the mobile line and home line at the same time using
-
two handsets.
You cannot be on a call using the mobile line and a Bluetooth headset via the home line at the
-
same time. These are both Bluetooth devices and only one can be used at a time.
If you are on a call using the mobile line, you cannot join the call using your paired mobile
-
phone. However, you can join the call using another 9850BT handset. Your mobile phone is
being used for the phone call so only features that are normally available during a call can be
used.
C. Register an additional handset
Your additional handset(s) will come pre-registered but should you need to register a handset,
follow these steps.
1.In standby mode, press MENU/OK then UP/DOWN to select Settings.
2.Press MENU/OK then UP/DOWN to select Register.
3.Press MENU/OK then enter the system PIN. (Default is 0000.)
4.Press MENU/OK. Then the display will show Press and hold PAGE button.
5.Press and HOLD PAGE on the base. The handset display will show Registering.... The
handset will return to standby mode if registration is successful.
Note:
If the base is found and the PIN is correct, an unused handset number will be assigned
automatically.
If the PIN is incorrect, "INCORRECT PIN!" will display with an error tone, you will need to re-
enter the correct PIN. If the base is not found, "NO BASE FOUND" will display.

De-register a handset

1.In standby mode, press MENU/OK then UP/DOWN to select Settings.
2.Press MENU/OK then UP/DOWN to select De-register.
3.Press MENU/OK then enter the system PIN. (Default is 0000.)
4.Press MENU/OK then UP/DOWN to select the desired handset.
5.Press MENU/OK. The display will show De-register?
6.Press MENU/OK to confirm. Display will show De-registered if it is successful.
Note: You cannot de-register the handset currently use in your hand.
You cannot de-register a handset if any other system handset is in use.
9. HELP
I cannot pair my mobile phone to the telephone base
- Make sure the Bluetooth function of your Bluetooth enabled mobile phone is turned on.
See your mobile phone User's Manual for more information.
-
- Make sure the cordless handset, corded base and mobile phone are located near each other.
Remove the TELEFUNKEN TX 1** from your mobile phone's Bluetooth device history list
-
(see your mobile phone User's Manual for more information).
Carefully follow the pairing instructions in the User's Guide, making sure that your mobile
-
phone is not connected to any other Bluetooth device(s).
- Turn off your mobile phone, and then turn it on again.
Reset the telephone base. Unplug the unit's electrical power.
-
TX Bluetooth 81