Alert Tones (Key Tone, Low Battery And No Coverage); Set Date And Time; Set Date And Time Manually; Auto Answer - Telefunken TX100 User Manual

Alert tones (Key tone, Low battery and No coverage)

You can turn on or OFF the alert tones of key press, battery low and out of range.
1. In standby mode, press MENU/OK then select Audio.
2. Select Key tone, low battery or No coverage.
3. Select On or Off.
4. Press MENU/OK to confirm.

Set date and time

If you have subscribed to Caller ID service, the date and time is set automatically for all handsets
when you receive your first call. The date and time is recorded with each answering machine
message you receive. If you have not subscribed to Caller ID service, you can set the date and
time manually.
Date format
1. In standby mode, press MENU/OK then select Settings.
2. Select Date format.
3. Select date format DD/MM/YY or MM/DD/YY.
4. Press MENU/OK to save your choice.
Time format
1. In standby mode, press MENU/OK then select Settings.
2. Select Time format.
3. Select date format 12 - Hour or 24 - Hour.
4. Press MENU/OK to save.

Set date and time manually

1. In standby mode, press MENU/OK then select Settings.
2. Select Set date/time.
3. Use the keypad to enter the date according to DD-MM-YY or MM-DD-YY format.
4. Press MENU/OK then use the keypad to enter the time according to 12-Hour or 24-Hour
format.
5. Press MENU/OK to save the settings.

Auto answer

1. In standby mode, press MENU/OK then select Settings.
2. Select Auto answer.
3. Select On or Off.
4. Press MENU/OK to confirm.
Note: As long as you have auto answer set to ON you can answer a call by lifting the handset OFF
the base.
If you have switched auto answer OFF, you will need to press HOME when you lift up the handset.
The default setting of Auto Answer is ON.

Handset reset

TX Bluetooth 71