Remote Access; Using The Answering Machine At The Base - Telefunken TX100 User Manual

D. Remote access
Remote access allows you to operate your answering machine and listen to your messages by
calling your phone from another phone.
To set the remote access /change remote access code
1. In standby mode, MENU/OK then UP/DOWN to select Answering sys.
2. Press MENU/OK then UP/DOWN to select Ans sys setup.
3.Press MENU/OK then UP/DOWN to select Remote access.
4. Press MENU/OK then UP/DOWN to select On or Off.
5. Press MENU/OK to confirm.
If you set the remote access ON：
- Press MENU/OK. Use the keypad to enter the old 4-digit PIN (default 4-digit PIN is
0000).
- Press MENU/OK. Use the keypad to enter the new 4-digit PIN.
- Press MENU/OK to enter the new 4-digit PIN again.
- Press MENU/OK to confirm.
To remotely access your answering system
1. Dial your phone number, when you hear your outgoing message, press * and then enter
your 4 –digit Remote Access PIN when outgoing message is still playing.
2. If you enter the incorrect PIN code for 3 times, your phone will hang up automatically.
3. When you have accessed your phone, you can use the keypad to operate your answering
machine.
4. Press the keys below to perform the following functions:
Keys
1
2
4
5
6
7
9
E. Using the answering machine at the base
TX Bluetooth
Description
During Message Playback
Play the remote access menu
Stop playing messages
Press once to repeat playing the
current message
beginning. Press twice to skip
backward to the previous message.
Delete the current message
Skip forward
Message is not playing
Play messages
from the
Turn on the answering
machine.
Turn off the answering
machine.
78