Table of Contents
Advertisement
D300 Series - Back
D300 Series - Back
7
8
9
1. BNC VIDEO INPUTS - Video inputs for direct connection to Cameras or for looping input to a
DVR. The number of ports will vary based on the DVR model (4 Channel, 8 Channel or 16
Channel).
2. RS232 PORT - Connection for an RS-232 Device.
* Not available on 4-Channel DVR Model.
3. ETHERNET PORT - Connects the DVR to a router for connection to the internet. Refer to the
Instructions on Page # for Remote Connection.
4. NTSC/PAL SWITCH - Changes the DVR unit between NTSC and PAL modes.
5. ALARM / SENSOR BLOCK - Ports for connecting an Alarm or Sensor Device (such as a Motion
Sensor or Window/Door Sensor).
6. AC INPUT - Connect the AC power using the power cord provided with the unit from the DVR
to an electrical outlet.
16
1
2
10
11
3
4
5
INSTALLERS MANUAL |
Copyright
SECTION 3
6
©
2006 Digimerge Technologies Inc.
Advertisement
Table of Contents
Troubleshooting
