Set Ip Address - Brother HL-6050 Service Manual

4.5.9

Set IP address

INFORMATION
NETWORK
TCP/IP
TCP/IP ENABLE
IP ADDRESS=
192.0.0.192
123.0.0.192
123.45.67.89
123.45.67.89
Press the + or – button until NETWORK appears (and to display
each setting shown below.)
Press the Set button.
Press the Set button.
Press the + button.
Press the Set button.
*
The last digit in the first part of the number is blinking.
Press the + or – button to increase or decrease the number.
Press the Set button to go to the next number.
*
Repeat this process until you have set your IP address.
Press the Set button to complete the IP address.
*
An asterisk appears at the end of the display.
2-27
HL-6050/6050D/6050DN SERVICE MANUAL