Brother HL-6050 Service Manual page 45

(3) Printing Proof data
You can use this setting to reprint Proof data that has been printed and has no security
settings. Documents that are placed in the Proof area are available to anyone. You might
use this setting for a document that will be moved to a public folder at a later date.
When the area to spool data is full, the earliest data is automatically deleted first. The
order of deleting data is not connected to the order of reprinting.
NOTE:
1) If you have not installed the optional CompactFlash card, the reprint data will be
deleted when the printer is turned off.
2) If there is data in the job information that cannot be displayed on the LCD, the
display shows '?'.
(4) Printing Public data
You can use this setting to reprint documents that are stored in a Public area of the
printer memory. Documents here will not be protected by a password and anyone can
access then using the front panel or a web browser. The printer will not print a Public
document when you send it to the printer. You must use the control panel of the printer or
connect to the printer through a web browser.
Public data can be deleted using the control panel of the printer or from the web-based
management software.
NOTE:
1). If you have not installed the optional CompactFlash card, the reprint data will be
deleted when the printer is turned off.
2). If there is data in the job information that cannot be displayed on the LCD, the
display shows '?'.
2-13
HL-6050/6050D/6050DN SERVICE MANUAL