CHAPTER 6 TROUBLESHOOTING
(6) Close the front cover of the printer.
After you have just used the printer, some parts inside the printer are extremely hot.
When you open the front cover of the printer, never touch the fuser or the fixing roller.
!
CAUTION:
• After you have removed the jammed paper, print a few test pages. This is to make sure
that the printed pages have no toner stains on them before you restart the print job.
• Remove the jammed paper carefully so you do not spread toner.
• Take care not to stain your hands and clothes with toner. Wash toner stains immediately
with cold water.
• We recommend that you put the drum unit assembly on a piece of disposable paper or
cloth in case you accidentally spill the toner.
• Handle the toner cartridge carefully. If toner scatters on your hands or clothes, wipe or
wash it off with cold water immediately.
• Do not touch the shaded parts shown in the figure below to avoid any degradation to the
print quality.
• To prevent damage to the printer from static electricity, do not touch the electrodes shown
in the figure below.
WARNING
6-16