Print A Test Page; Setting Our Language On The Control Panel - Brother HL-6050 Service Manual

3.1.3

Print a test page

(1) Make sure the printer power switch is off. Connect the AC power cord to the printer. Do
not connect the interface cable. Connecting the interface cable is done when installing the
driver.
(2) Plug the AC power cord into an AC power outlet/socket. Turn the power's power switch
on.
(3) After the printer has finished warming up, the READY message appears.
(4) Press the Go button. The printer prints a demo page. Check that the demo page has
printed correctly.
3.1.4

Setting our language on the control panel

(1) Press the + button until SETUP is displayed. Press the Set button.
(2) Press the Set button again.
(3) Press the + or – button to select your language. Press the Set button to accept.
Fig. 2-7
Fig. 2-8
2-7
HL-6050/6050D/6050DN SERVICE MANUAL