CHAPTER 2 INSTALLATION AND BASIC OPERATION
3.1.2
Load paper into the paper tray
(1) Pull the paper tray completely out of the printer.
(2) While pressing the paper guide release lever, slide the adjusters to fit the paper size.
Check that the guides are firmly in the slots.
NOTE:
For Legal size paper, press the universal guide release button and pull out the back of the
paper tray.
(3) Fan the stack of paper well to avoid paper jams and misfeeds.
(4) Put paper in the paper tray. Check that the paper is flat in the tray and below the
maximum paper mark.
(5) Put the paper tray firmly back in the printer.
Fig. 2-4
Fig. 2-5
Fig. 2-6
2-6