APRILIA SR 50 Workshop Manual page 51

SR 50
CHANGE
• Position the vehicle on firm and level ground.
• Position the vehicle on the center stand.
WARNING
Allow several minutes for the engine and
exhaust system to cool down.
•
Stop the engine and let it cool down, in order to allow
the oil to flow into the crankcase and cool down.
•
Unscrew and extract the plug/dipstick.
•
Take a receptacle of suitable capacity and set it under
the drain screw.
•
Release and remove the drain screw.
•
Let fluid fully drain inside the container.
WARNING
Used oil contains substances that are very
dangerous for the environment. Dispose of
used oil in
regulations.
•
Fit and tighten the drain screw.
•
Pour oil through the transmission oil filler hole.
•
Screw and tighten the plug/dipstick.
•
Start the engine and let it run for a few minutes. Stop
the engine and let it cool down.
•
Check the gear fluid level.
accordance with applicable
PERIODIC MAINTENANCE
2 - 27