Cleaning Silencer; Angle Transmission - Echo SRM-4605 Operator's Manual

Cleaning silencer

1. Silencer cover. 2. Silencer.
Remove silencer cover.
Clean deposits from silencer and tighten two bolts.
Install silencer cover.

Angle transmission

NOTE
Use good-quality lithium multi grease.
1. Angle transmission.
Remove the plug and drain screw from the angle transmission.
Add grease into the transmission until old grease is pushed out.
If necessary, use a low pressure pump.
Reinstall the drain screw and plug.
3. Two bolts.
2. Plug (bolt). 3. Drain screw.
24
4. Hexagonal wrench.