Cleaning Silencer; Angle Transmission - Echo SRM-4605 Operator's Manual

Cleaning silencer

1. Silencer cover. 2. Silencer.
 Remove silencer cover.
 Clean deposits from silencer and tighten two bolts.
 Install silencer cover.

Angle transmission

NOTE
Use good quality lithium multi grease.
1. Angle transmission.
 Remove the plug and drain screw from the angle transmission.
 Add grease into the transmission until old grease is pushed out.
If necessary, use a low pressure pump.
 Reinstall the drain screw and plug.
3. Two bolts.
2. Plug (bolt). 3. Drain screw.
26
4. Hexagonal wrench.