Parallel Port IRQ
If the onboard parallel mode is not on auto mode, the user can select
the interrupt line for onboard parallel port. We suggest that the user select
the interrupt for the onboard parallel port as shown below:
Onboard parallel port set at
LPT1(378H)
LPT2(278H)
LPT3(3BCH)
Parallel Port DMA
This option allows user to choose DMA channel 1 to 3 for the
onboard parallel port on ECP mode.
Onboard IDE
Set this option to enable or disable on board IDE controller.
Onboard AC'97 Audio
This item allows you to decide to enable/disable the VIA chipset
family to support AC97Audio. The settings are Enabled, Disabled.
Onboard MC'97 Modem
This item allows you to decide to enable/disable the VIA chipset
family to support MC97 Modem. The settings are Enabled, Disabled.
®
Parallel Port IRQ
7
5
5
3-23