Parallel Port Irq; Parallel Port Dma Channel - MSI MICRO ATX AL12 User Manual

CHAPTER 3 CHAPTER 3 CHAPTER 3 CHAPTER 3 CHAPTER 3

Parallel Port IRQ

If the onboard parallel mode is not on auto mode, the user can
select the interrupt line for onboard parallel port. We suggest that the user
select the interrupt for the onboard parallel port as shown below:
Onboard parallel port set at
LPT1(378H)
LPT2(278H)
LPT3(3BCH)

Parallel Port DMA Channel

This option allows user to choose DMA channel 1 to 3 for the
onboard parallel port on ECP mode.
Onboard IDE
Set this option to enable or disable the on board IDE controller.
CDROM DMA Mode
Set this option to Normal or Turbo.
®
AMI AMI BIOS USER'S GUIDE BIOS USER'S GUIDE
AMI AMI AMI BIOS USER'S GUIDE BIOS USER'S GUIDE BIOS USER'S GUIDE
Parallel Port IRQ
7
5
5
3-14