Implementing The Ipsec Remote-Access Vpn Scenario - Cisco ASA 5505 Getting Started Manual

Implementing the IPSec Remote-Access VPN Scenario

Implementing the IPSec Remote-Access VPN
Scenario
Cisco ASA 5505 Getting Started Guide
7-2
Figure 7-1 Network Layout for Remote Access VPN Scenario
This section describes how to configure the adaptive security appliance to accept
IPSec VPN connections from remote clients and devices. If you are implementing
an Easy VPN solution, this section describes how to configure an Easy VPN
server (also known as a headend device).
Values for example configuration settings are taken from the remote-access
scenario illustrated in
This section includes the following topics:
Information to Have Available, page 7-3
•
Starting ASDM, page 7-3
•
Configuring the ASA 5505 for an IPSec Remote-Access VPN, page 7-5
•
Selecting VPN Client Types, page 7-6
•
Specifying the VPN Tunnel Group Name and Authentication Method,
•
page 7-7
Chapter 7 Scenario: IPSec Remote-Access VPN Configuration
Figure 7-1.
78-17612-02