Configuring An External Identity For The Dmz Web Server - Cisco ASA 5505 Getting Started Manual

Configuring the Security Appliance for a DMZ Deployment
Step 5

Configuring an External Identity for the DMZ Web Server

Step 1
Cisco ASA 5505 Getting Started Guide
6-12
Click OK to return to the Configuration > NAT pane. The configuration should
look similar to the following:
The DMZ web server needs to be accessible by all hosts on the Internet. This
configuration requires translating the private IP address of the DMZ web server
to a public IP address, which allows outside HTTP clients to access the web server
without being aware of the adaptive security appliance. To map the real web
server IP address (10.30.30.30) statically to a public IP address
(209.165.200.225), perform the following steps:
In the ASDM main window, choose Configuration > NAT.
Chapter 6 Scenario: DMZ Configuration
78-17612-02