Verifying The Remote-Access Vpn Configuration - Cisco ASA 5505 Getting Started Manual

Chapter 7 Scenario: IPSec Remote-Access VPN Configuration
Step 2

Verifying the Remote-Access VPN Configuration

78-17612-02
Enable split tunneling by checking the Enable Split Tunneling ... check
Note
box at the bottom of the screen. Split tunneling allows traffic outside the
configured networks to be sent out directly to the Internet instead of over
the encrypted VPN tunnel.
Click Next to continue.
In Step 11 of the VPN Wizard, review the configuration attributes for the new
VPN tunnel. The displayed configuration should be similar to the following:
Implementing the IPSec Remote-Access VPN Scenario
Cisco ASA 5505 Getting Started Guide
7-17