Programming Tv Channels - Grundig XENTIA 72 User Manual

SETTINGS
____________________________________________________________________________________

Programming TV channels

The TV set is equipped with the automatic tuning system "ATS euro plus" which
carries out channel position assignment for you.
1 After switching on the TV set, select he »English« dialog language and con-
firm with »OK«.
Note:
If the »Select dialog language« page does not appear, press »
»OK« to display the Dialog Centre menu.
Use »,
confirm with »OK«.
Use »,
house« row then confirm with »OK«.
2 Confirm your country with »OK«.
The automatic tuning system is started. Depending on the number of
channels which can be received, the search can take one minute and more.
3 When the automatic allocation of the channel positions is completed, a table
with information about the installation menu is displayed.
4
Press »TXT« to exit this table.
The »INSTALLATION« menu is displayed.
5 Make desired settings and end setting with »TXT« or, if you want to watch
television immediately, switch off menu with »TXT«. A menu with informati-
on on the Easy Dialog System appears.
6
Press »TXT« to switch to TV operation.
Note:
It is possible to call up all functions of the »INSTALLATION« menu also later
in the Easy Dialog Centre under »INSTALLATION«.
, « or ». . « to select the »AUTOMATIC PROGRAMMING« row then
, .
« or ». « to select the »Complete Reprogramming when moving
i « and then
17