Connecting A Hifi System Or Active Loudspeakers; Putting Batteries Into The Remote Control - Grundig XENTIA 72 User Manual

CONNECTION AND PREPARATION
L
AUDIO IN
R
L
R
AV2 AV1

Putting batteries into the remote control

Connecting a hifi system or active loudspeakers

Instead of using the television speakers as front speakers, you can use the loud-
speakers of your hifi system or active front speakers.
1
Connect the hifi system or the active left/right speakers to the
Cinch sockets.
1
Open the battery compartment by pulling off the cover.
2 Insert the batteries (Mignon, i.e. UM-3 or AA, 2 x 1.5 V).
Observe the polarity when inserting the batteries.
Note:
If your television does not react to the remote control commands correctly,
then the batteries could be used up. Remove empty batteries. There is no
liability for damage caused by leaking batteries.
Environmental note:
The batteries – even those free of heavy metal – cannot be disposed of in
normal household rubbish. Used batteries must be disposed of in used
battery collection containers in businesses or be taken to public waste
disposal facilities.
_______________________________________
»L AUDIO
R«
15