Call Channel Programming - Icom IC-M504 Instruction Manual

■ Call channel programming

Call channel s used to select Channel 9 (default); however,
you can program the call channel wth your most often-used
channels n each channel group for quck recall.
q Whle pushng and hold-
ng [H/L], push [CH/WX•
DUAL•U/I/C] one or more
tmes to select the desred
channel group (U.S.A., In-
ternatonal or Canada) to be
programmed.
w Push [16•9] for 1 sec. to
select the call channel of
the selected channel group.
• "C A L L " and call channel
number appear.
e Push [16•9] agan for 3 sec.
(untl a long beep changes
to 2 short beeps) to enter
call channel programmng.
• Channel number starts blnk-
ng.
25W INT
DUP
34 34.506N
123 23.236W
UTC 12:00 INTL
25W INT CALL
TAG
34 34.506N
123 23.236W
UTC 12:00 CALLING
25W INT CALL
TAG
34 34.506N
123 23.236W
UTC 12:00 CALLING
r Rotate [DIAL] to select the
desred channel.
t Push [16•9] to program the
dsplayed channel as the
call channel.
• Push [CLR] to cancel.
• The channel number stops
blnkng.
BASIC OPERATION
25W INT CALL
DUP
34 34.506N
123 23.236W
UTC 12:00 INTL
25W INT CALL
DUP
34 34.506N
123 23.236W
UTC 12:00 INTL
3
3
9