Dsc Operation; Mmsi Code Programming - Icom IC-M504 Instruction Manual

■ MMSI code programming

The 9-dgt MMSI (Martme Moble Servce Identty: DSC
self ID) code can be programmed at power ON.
Ths code programmng can be performed only twce.
After the code programmng, t can be changed only by
your dealer or dstrbutor.
q Turn power OFF.
w Whle pushng [MENU], turn power ON to enter MMSI
code programmng condton.
e After the dsplay appears, release [MENU].
r Push [MENU] agan to enter the DSC menu.
t Rotate [DIAL] to select "Set up," push [DIAL•ENTER].
--DSC Menu--
Select Item
Position Input
Received Calls
˘Set up
Exit
y Rotate [DIAL] to select "MMSI Check," push [DIAL•ENTER].
--DSC Menu--
Set up
Add:INDV ID
Add:Group ID
DEL:INDV ID
DEL:Group ID
Offset Time
˘MMSI Check

DSC OPERATION

u Rotate [DIAL] to set the specfic 9-dgt MMSI code.
• Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor for-
ward or backward, respectvely.
• Push [CLR] to cancel and return to the set up menu.
--DSC Menu--
MMSI Check
_________
<CLR Exit / ENT OK>
i After enterng the 9-dgt code, push [DIAL•ENTER] to set
the code.
• Returns to the set up menu.
o Push [CLR] or rotate [DIAL] to select "Exit," push
[DIAL•ENTER].
• Returns to the DSC menu.
• Repeat agan to return to the normal operaton condton.
6
5
6
15