Renault Formula 1.6 2013 User Manual page 41

Release 1.0 - 24/04/2013
Details on the configuration pages:
•
Beacon: to set up the timing parameters.
Press the green button to select one of the three parameters and
the blue or yellow one to adjust the time in seconds.
Min lap time: to set the minimum gap time between two laps (to avoid
in between beacons
Display delay: to set the delay in seconds, between the time the
beacon is set off and the
Display time: to set the length of time, during which the lap time
remains displayed.
•
Alarms: to set the min and the max values of warning of the
different parameters.
You go from one value to the other by pushing the green button and
you adjust the value thanks to the blue and yellow buttons (the unit
value is displayed next to the given parameter).
•
Gear: to set the minimum and maximum of each gear (in volt)
In the little window on the right, you have the voltage value given
by the barrel potentiometer for the current gear engaged (R; N; 1).
Setting example : for the first gear
-
-
-
-
NB: keep a little margin between the max value of a gear and the
min value the following gear.
on the track).
Put the first gear
Check the value displays in the box current input
Move the cursor with the green button on the first row
Adjust the min and max values to "frame" the current input
value with the blue or yellow button.
lap time displayed on the screen.
41