Renault Formula 1.6 2013 User Manual page 33

Release 1.0 - 24/04/2013
making sure is correctly seated in its housing
Install the lip seal in the back housing after checking its condition
-
Extract the external ring from the main casing hitting the ring by the 3
-
dedicated holes
Clean and check the condition of the bearing journal
-
Put the new ring using a press and making sure is correctly seated in its
-
housing
Remove the secondary shaft bearing using possibly the tool FACOM (ref.
-
U.53T1) taking care not to damage the bearing journal
Clean and check the condition of the bearing journal
-
Install the new bearing using a press and making sure it is well positioned
-
against the spacer adjuster
- Reinstall the differential and the gears (see 7.5)
Reinstall the front plate. (tighten the 11xM6 bolts bonded with LOCTITE
-
222 to 0.5DaN.m)
Differential bearings
Remove the differential (see 7.7)
-
Remove the
-
bearings (1)
taking care not to damage it
Clean and
-
condition.
Fit the new bearings using a
-
press making sure it is correctly
seated on its journal.
(2)
2
differential case
using a press and
check the parts
2
1
33
1
2