Rebuilding Of The Gearbox - Renault Formula 1.6 2013 User Manual

Release 1.0 - 24/04/2013

7.11. Rebuilding of the gearbox

In Sadev workshop rebuilding
Notes :
The gearboxes are delivered leaded and numbered.
-
The absence of lead 'Sadev' imposes a careful attitude in the event of
-
minor or major problem to us, and applies to complete reserve of our
share if necessary.
Return gear boxes to revision :
At the time of the return of the gearboxes in our buildings, a certain procedure of
delivery has to be respected, so that our intervention can be total, and practical
(casing ' closed' for passage to the bench).
We must receive the complete product as described below:
Release bearing in place
-
entry and exit of lubrication closed by plugs envisaged for this purpose
-
(Goodridge, SpeedFlow...)
Gear box drained and cleaned
-
Drain plug and drain plug seal in place
-
Differential in place
-
A card specifying the kilometers of the special stage and connection since
-
the last service, available near our sales department
The absence of elements can be specified on the card, but in case of doubt, the
material will be send back re-equipped.
Administrative procedure:
1. Send a request for service to SADEV sales department
2. Forward The material and its card (description above) in our workshops
3. Approve the estimate presented by SADEV sales department
4. APPROXIMATELY
CONSIDERED
Personal revision:
After sale parts for customers who want to proceed a revision by themselves, are
delivered only by SADEV sales service.
SADEV IS NOT RESPONSIBLE FOR ANY DAMAGE FOLLOWING A REVISION NOT
EXECUTED IN A SADEV AGREED TECHNICAL SERVICE (LIST ON DEMAND).
As every mechanical part which is dedicated for racing, there
2 TO 3 WEEKS
is not warranty at all from our side.
OF DELIVERY
35
TIME MUST BE