Settings Menu - Polaroid 19" HD-READY User Manual

10.4-Settings menu

Press Setup button on your remote
controller while in USB Mode to display the
Settings menu. In this menu, you can also
make settings related to Video, Language
Settings and Preferences as in DVD mode.
10.4.1-Video Settings
This menu includes Screen Mode functions.
10.4.1.1-Screen Mode
Select the broadcasting system you are
going to watch by Screen Mode function.
10.4.1.2-TV Mode
With this feature, you may change the picture
format of the films you are watching as
Normal/Ps, Normal/Lb and Wide Screen.
Note: You may set the desired picture
format from the Picture menu in DVD mode.
10.4.2-Language Settings
Select the OSD Language tab in the
Language Settings menu and press OK
button. Select the desired language by
using up/down movement buttons from the
displayed screen and press the OK button.
In USB Mode, all the USB setting indicators
will be displayed in the language you have
selected.
10.4.3-Preferences
This menu includes Angle Info, Factory
Setting, Last Memory, Content Level and
Password features.
10.4.3.1-Angle Info
This feature, if DVD supports, is used for
films containing screens shot from different
camera angles. This feature allows you
to view the film from different angles. To
activate Angle Info function, highlight Angle
Info in the Preferences menu, select On and
press OK button.
10.4.3.2-Factory Settings
You can switch back to Factory Settings with
this feature.
10.4.3.3-Last Memory
Last Memory feature allows the Disc resume
playing when you switch to DVD mode.
To activate Last Memory function, set Last
Memory to On and press OK button.
10.4.3.4-Content Level
This feature is designed to prevent watching
the movies above the age limit. It works only
for movies which have content level feature
or at certain scenes of the movie. Select one
of the 8 options to activate Content Level
and press OK button. Password screen will
be displayed. The default password is set
as "0000". When you enter the password,
Content Level feature will be activated.
10.4.3.5-Password
With the password feature you can change
your Content Level password according
to your personal preference. The default
password is set as "0000" at the factory.
To change your password, highligh the
Password menu and press OK button.
Enter respectively your Old Password, New
Password and your New Password again to
approve in the displayed screen and press
OK button to confirm. Password changing
process is thus completed.
Notes:
1- In some cases, according to the
properties of the files you had stored on your
USB devices, loading of them may take a
little longer (5 - 10 seconds) when you wish
to watch or view the files.
2- File systems supported by the USB
devices you connected to the USB port must
be FAT and FAT32.
3- Audio files below 32 Khz are not
supported.
31 I
EN