Operation; Channel Menu - Polaroid I0312 User Manual

Polaroid • I0312/I0313
TV Setup Guide
Please select an OSD Language
Cesky English
~
Espanol
Dansk
Deutsch E ka
This screen only appears when the TV is turned on for the first time, or after a reset to default factory settings.
You can choose language, country and auto tuning programs. After tuning, the screen will skip to the first DTV
program.
To select the MENU mode, press the menu button on the side control panel of the TV, or press the Menu button
on the remote control.

1.CHANNEL MENU

The first item found in the MENU is CHANNEL MENU (for ATV or DTV source only). ATV = Analogue TV,
DTV = Digital TV.
You can search channels and edit programs here.
1).Auto Tuning:
Search all the channels automatically (you can select ATV, DTV, or DTV+ATV searching).
Press to select search type, then press
button to start auto tuning.
NOTE:
All the channels including ATV, DTV and Radio can be tuned at once, if the Tune Type is set to DTV+ATV.
Any previously stored channels will be deleted after auto tuning is carried out.
After auto tuning, the receiver will skip to the first DTV channel.
The radio channels are the ones provided by some TV stations. This unit does not receive
DAB+Digital Radio broadcasts.
Magyar Polski
Fran ais
Hrvatski Nederlands Portugues
Italiano Norsk Pycck
OK
<
CHANNEL
Tune Type
Australia
Austria
Belgium
TV
DTV : 0 Programme(s)
Radio : 0 Programme(s)
96%
Australia Bulgaria Denmark
Austria Croatia Finland
Belgium Czech France
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
>
Signal Information
Software Update(OAD)Off
Software Update(USB)
DTV+ATV
Bulgaria
Denmark
Croatia Finland
Czech France
MENU
to select country (eg. Australia), then press the OK
Channel Tuning
: 0 Programme(s)
UHF CH 68 DTV
-11-

OPERATION

Country
Germany Italy
Greece Luxembourg
Hungary Netherlands
OK