Features Menu Settings - Polaroid 19" HD-READY User Manual

7.2.8.5-Letterbox
While watching a "16:9 or cinemascope
formatted" film or video cassette, this setting
will remove or minimize the black stripes on
the background by zooming in the picture
without diffusing it.
7.2.8.6-Subtitle
If the subtitles are transmitted in the "16:9
formatted" broadcast, then this setting will
push the picture upwards in order to ensure
the entire written text to be seen.
Note: Since the use of certain functions
in order to change the picture sizes for
collective projection or commercial purposes
(modifying the height and width etc.) will
be deemed an infringement of the picture's
copyright, legal proceedings can be carried
out as required under relevant laws.

7.3-Features Menu Settings

Press the MENU button on your remote
control. Select FEATURES tab by pressing
the Up/Down movement buttons and press
the OK button. The Features menu will be
displayed.
FEATURES
LANGUAGE
SLEEP TIMER
PANEL LOCK
DIGITAL FEATURES
DECODER
AUTO SCART
CHANGE
You can select the titles for which you would
like to perform an operation in this menu by
using the Up/Down movement buttons.
Note: The DIGITAL FEATURES tab in
the features menu is deactivated in Analog
mode. It is activated in Digital mode only.
7.3.1-Off Time
Off Timer switches your television
automatically to Standby Mode after the
preset time has elapsed. You can adjust this
time from 15 to 120 minutes with increments
of 15 minutes. To activate this feature, select
the Off Time tab and press Right/Left
movement buttons to select the desired time.
7.3.2-Panel Lock
If this feature is turned On, the control
buttons on your LCD television will be locked
and will not function. They will be active
again when the feature is turned Off.
7.3.3-Digital Features
You can adjust the Digital TV features from
this menu. See page 12.
7.3.4-Decoder
This feature is used to turn off the sound
and picture output on the scart. If the
scart output is required to be active (on)
for an analog decoder or recorder device
that will be connected via its socket, then
switch to the channel to be recorder and
set the DECODER option to ON from the
FEATURES menu by means of right/left
movement buttons. This value should be
stored separately for each channel.
7.3.5-Auto Scart
When this feature is set to ON and when you
operate an external device that is connected
to your LCD television via scart, TV will
ENGLISH
OFF
automatically switch to AV mode where
OFF
the device is connected. When it is set to
OFF
ON
Off, your TV does not switch to the external
device automatically.
BACK
21 I
EN