Language Settings - Polaroid 19" HD-READY User Manual

6.3.6-Digital Features
To enter digital features menu, select
FEATURES tab from the main menu
by using Up/Down movement
buttons. Select DIGITAL FEATURES
tab from FEATURES menu by
using Up/Down movement buttons
and press OK button to confirm. DIGITAL
FEATURES menu will be displayed.
Digital Features

Language Settings

Access Control
User Interface Options
Timers
Favourite List
No Common Interface Module Present
System Menu
Select
You can select the menu headings with Up/
Down movement buttons to make settings.
6.3.6.1-Language Settings
You can select subtitle and audio language
provided that the broadcast is supported for
all digital broadcasting channels. Unless you
make any selection, the language supported
by the broadcaster will be selected
automatically.
To perform language selection, select
Subtitling Language 1, Subtitling
Language 2, Audio Language 1,
Audio Language 2 tab from the
Language Settings menu by using
Up/Down movement buttons and
make your language selection with
Left/Right movement buttons. You
can also select subtitles directly by
SUBT button on your remote control
or make sound selection by AUDIO
button.
6.3.6.2-Access Control
With this feature you can preclude channels
that are not appropriate for children and
set age restriction for programs being
broadcasted.
Back
15 I
Access Control
Lock/Unlock Channels
Change PIN
Select
Lock/Unlock Channels: Select Lock/
Unlock Channels tabs from Access
Control menu and press OK button to
confirm. All TV Channels list will be displayed;
select the channel you want to preclude with
Up/Down movement buttons and press OK
button to confirm. x mark will be displayed
at the beginning of the channel name and
thus channel is precluded. To remove such
preclusion, repeat the same steps. Select
the channel to access the precluded channel
and enter the correct password into the
displayed password screen. The channel
will not be displayed unless the correct
password is entered.
Note 1: To re-prevent access after entering
the correct password and displaying the
precluded channel, your television has to be
switched to Standby mode and turned on
again.
Note 2: The password for both of these
features has been set as 0000 at the factory.
You can change the password as you wish
under Change PIN item in the Access
Control menu.
6.3.6.3-User Interface Options
From this menu, you can decide whether
to display the scrambled channels in the
program table or not. If List Scrambled
Channels is set to ON, all channels will
be displayed, if it is set to OFF, scrambled
channels will not be displayed and if it is set
to AUTO and a CI card is installed to your
television, then the scrambled channels
supported by the card will be displayed.
6.3.6.4-Timers
In this menu you can view Reminders you
had entered from the EPG or change or
delete the entered Reminders.
EN
Back