Fine Tuning - Polaroid 19" HD-READY User Manual

SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
CHANGE
system in which you would like to
make the search from the SYSTEM
tab. Move into CHANNEL tab by
pressing the down movement button.
Press OK on your remote control to
select "S" for cable channels and "C"
for channels received via the antenna.
Move onto the PROGRAM NO
tab and using the number buttons
enter the channel number in which you
would like to have the channel stored. If the
broadcast viewed on the screen is of your
desired quality, first move onto the STORE
tab with the down movement button to
store in the memory the selection you have
made and store the channel by pressing
the Left or Right movement buttons. The
prompt STORED will be displayed briefly.
The channel will be stored according to the
program number of your choice. You can
tune and store in memory other channels the
same way. In the event that you wish to exit
the channel settings menu for any reason,
simply press the EXIT button.
6.4.2.2-If you do not know the
channel number
Press the MENU button. Move to
the SETUP menu by pressing the
Down movement button in the Main
Menu and confirm your selection
with the OK button. Setup menu will
be displayed. Select the system in
which you would like to make the
search from the SYSTEM tab. Move
into CHANNEL tab by pressing
the down movement button. Press
OK on your remote control to
select "S" for cable channels and
"C" for channels received via the antenna.
Select SEARCH tab using the Up/Down
movement buttons, and scan the channels
BG
S06
0
P13
BACK
17 I
in ascending order with Right movement
button and in descending order with
Left movement button. If the channel
that is found is of your liking, select
the STORE tab. Then store it in the
memory by pressing the Right or
Left movement buttons. Repeat the
same procedure for other channels
by selecting the program number of your
choice from the PROGRAM NO tab. If
the channel you found is not of the desired
quality and requires Fine Tuning or if you
would like to rename the channel, refer to the
relevant sections.

6.4.3-Fine Tuning

If the channel you found is not of the desired
quality and requires Fine Tuning, then
select the FINE TUNE tab by pressing
the Down movement button in the Setup
menu. Using the Left/Right movement
buttons on your remote control, adjust the
broadcast displayed on the screen to your
desired quality. Under normal circumstances,
you will not require to use the Fine Tune
function. The AFC values of your television
will automatically adjust and lock themselves
to the channel. However, you might need
it in case the television transmitters do not
operate according to the standards. To store
in the memory the settings you have made,
select the Store tab and press the Right or
Left movement button.
6.4.4-Program Table
Press the MENU button. Move to the
PROGRAM TABLE tab by pressing the
Down movement button in Main Menu and
confirm your selection with the OK button.
Program Table menu will be displayed.
PROGRAM TABLE
00 05
01 KANAL 06
02 KANAL 07
03 08
04 09
SKIP
MOVE
SELECT
EN
10
11
12
13
14
NAME
DELETE
BACK