Cunferencing; Transferring Calls - Comdial DigiTech 7700S User Manual

GCA7fJ-184
DigtTech Station User's Guide
Transferring Outside Calls
l
To announce a call before transferring it,
1.
answer outside call,
2.
press TRANYCONF (call is placed on hold),
3. dial statin number,
4.
upon answer, announca the call,
5. hang up the handset (call is transferred).
l
To transfer a call without first announcing it,
1. answer outside call,
2. press TRANYCONF (call is placed on hold),
3. dial statton number,
4. hang up handset. Call will m-ring your telephone if it is not answered
within a preprogrammed time.
l
If you hear a busy signal or receive no answer,
1. press RECON to return to call,
2. press SOHVA to tell intercom patty that a call awaits
3.
press CAMP to camp on at that station,
4. press OVER to join intercom party's current conversation.
Conferencing Stations Together
l
To conference any combination of inside stations and
outside lines,
. 1.
make first call and press TRANYCONF,
2. make next call and press TPANYCONF to establish conference,
3. repeat steps to add up to two more parties.
NOTEr When setting up a conference call with outside lines and inside stations,
you must call the outside lines first. Use the line group access codes to
place the outside lines in your conference.
l
To drop outside lines from the conference,
1. first press HOLD to place all calls on hold (not doing this will result
in a tone burst interrupting the remaining conferees),
2. once all calls are on hold, press the line that you wish to bring back
followed by TFtANYCONF; this will retrieve only that line to the
conference,
3.
use step two to bring back each line from hold.
i-
F: