Assembly; Carton Contents - Briggs & Stratton Elite series Owner's Manual

3400 psi elite series
Hide thumbs Also See for Elite series:
Table of Contents

Advertisement

ASSEMBLY

IMPORTANT: Read entire owner's manual before you
attempt to assemble or operate your new pressure washer.
Remove Pressure Washer From
Carton
• Remove the high pressure hose, handle, and parts box
included with pressure washer.
• Slice two corners at the end of carton from top to
bottom so the panel can be folded down flat, then
remove all packing material.
• Roll pressure washer out of carton.

Carton Contents

Items in the carton include:
• Main unit
• High pressure hose
• Handle
• Engine oil
• Safety goggles
• Spray gun with quick connect fitting
• Nozzle extension with quick connect fitting
• Pump oil dipstick (hanging on pump)
• Accessory bag (includes the following):
Owner's registration card
Bag containing 5 multi–colored quick connect nozzles
Maintenance kit
Owner's manual
Engine manual
Handle hardware, including 4 carriage bolts and
4 flange nuts
If any of the above parts are missing or damaged, call the
pressure washer helpline at 1–800–743–4115.
3400 PSI Pressure Washer
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer helpline at 1-800-743-4115.
To prepare your pressure washer for operation, you
will need to perform these tasks:
1.
Fill out and send in registration card.
2.
Attach handle to main unit.
3.
Install oil dipstick onto pump.
4.
Add oil to engine.
5.
Add fuel to fuel tank.
6.
Connect high pressure hose to spray gun and pump.
7.
Connect water supply to pump.
8.
Connect nozzle extension to spray gun.
9.
Select and install desired nozzle.
Attach Handle to the Pressure
Washer
Use either a 13mm or adjustable wrench to attach the
handle to the pressure washer.
To attach handle to the pressure washer:
1.
Slowly tip pressure washer forward and let it gently
rest on front bumper.
2.
Align holes on handle with holes on base.
3.
Insert carriage bolts provided to hold handle in place
(Figure 1).
Figure 1 — Attach Handle to Pressure Washer
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite 01808

Table of Contents