How To Log In - Philips Divar Installation Manual

How to Log in

When you start the Configuration Tool as a stand-alone application via a
network, the window appears. (Click
Login
exit the application.)
When the Configuration Tool application is started for the first time, the Divar
list is empty. You must first add a Divar to the list. To add a Divar to the list or to
modify a Divar entry, click
Edit >>
To control a particular Divar:
1. Select the Divar you want to control.
2. Type your user name and password.
> The user name and password to be filled-in are set in the System settings/
Connectivity/Network access menu of the Divar itself.
3. Click Login.
Philips Communication, Security & Imaging
to discontinue login and
Cancel
(see following paragraph).
To modify the Divar list
The window allows you to add Divars to the list or delete Divars
Edit Divar list
from the list.
To add a Divar to the list:
1. Click Add . . .
2. Enter the IP address or nickname of the new Divar.
> The IP address to be filled-in is set in the System settings/Connectivity/Network setup
menu of the Divar itself.
3. Type a name in the Name box or retrieve it from the Divar by checking the
Retrieve from Divar box.
4. Click OK.
To delete a Divar from the list:
1. In the list, select the Divar you wish to delete.
2. Click Delete.
> The selected Divar is removed from the list.
Using the Configuration Tool
6-3