Table of Contents
Advertisement
>>> Camera control
• Set the
Auto Camera Contrast
automatically adjust the contrast for each camera.
• If you set the
Auto Camera Contrast
submenu.
Adjust Contrast
Adjust contrast
• Select a camera in the menu or press a camera key on the unit. The
selected camera image appears.
• Vary the manual gain value between -100 and +100 to adjust the
contrast.
• To set the default value (0), press the F1 key.
>> Camera controllable
• A check mark under a camera number indicates that it can be controlled
remotely by the Control Center application.
• Press a camera key on the unit to make a camera controllable or not.
• By default all cameras are controllable.
>> Sequences
The sequence in which cameras are displayed on monitor A and monitor B is set
in the full screen list menu.
• Set the length of time each image remains on the screen by filling in the
dwell time value for each monitor.
• Dwell time can vary from 1 to 60 seconds. The default value is 5 seconds.
Philips Communication, Security & Imaging
to
to let the system
On
to
, you can access the
Off
>>> List Full screen monitor A
• The sequence list shows the order in which the camera images are
displayed in full screen mode.
• Use the arrow keys to select a position in the list. Press a camera key
on the unit to enter a camera number in the list.
• Press F2 to clear the rest of the list.
• Press F1 to restore all defaults. Connected cameras are then listed in
ascending order.
>>> List Full screen monitor B
• The sequence list shows the order in which the camera images are
displayed in full screen mode.
• Use the arrow keys to select a position in the list. Press a camera key
on the unit to enter a camera number in the list.
• Press F2 to clear the rest of the list.
• Press F1 to restore all defaults. Connected cameras are then listed in
ascending order.
>> Configure Monitors
• To view camera names, and time and date on a monitor set these items to
.
On
• Select the position for the text (top or bottom and fine position +11/-11).
Select text intensity. Select the border intensity of the cameos from four
values.
• To automatically close the menu when an alarm or event occurs, set the
item to
Exit Menu on Alarms
• The menu is closed after five minutes if you set the
.
On
Menu system
.
Yes
Menu Time-out
to
5-7
Advertisement
Table of Contents
