Cisco 7961G Administration Manual page 97

Chapter 4 Configuring Settings on the Cisco IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
SW Port Speed and duplex of the network port
Configuration (labeled 10/100 SW on the 7961G
and 7941G; labeled 10/100/100 SW
on the 7961G-GE and 7941G-GE).
Valid values:
•
•
•
•
•
•
If the phone is connected to a switch,
configure the port on the switch to
the same speed/duplex as the phone,
or configure both to auto-negotiate.
If you change the setting of this
option, you must change the PC Port
Configuration option to the same
setting.
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
OL-6966-01
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half
duplex
100 Full—100-BaseT/full
duplex
1000 Full—1000-BaseT/full
duplex
Network Configuration Menu
To Change
Unlock network configuration options.
1.
Scroll to the SW Port Configuration
2.
option and then press the Edit softkey.
Scroll to the setting that you want and
3.
then press the Select softkey.
Press the Save softkey.
4.
4-13