Editing Values - Cisco 7961G Administration Manual

Configuration Menus on the Cisco IP Phone
Caution

Editing Values

Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
4-4
To unlock or lock options, press **#. This action either locks or unlocks the
options, depending on the previous state.
Make sure to lock options after you have made your changes.
Do not press **# to unlock options and then immediately press **# again to lock
options. The phone will interpret this sequence as **#**, which will reset the
phone. To lock options after unlocking them, wait at least 10 seconds before you
press **# again.
Related Topics
Displaying a Configuration Menu, page 4-2
•
Editing Values, page 4-4
•
Overview of Options Configurable from a Phone, page 4-5
•
Network Configuration Menu, page 4-6
•
• Device Configuration Menu, page 4-15
When you edit the value of an option setting, follow these guidelines:
• Use the keys on the keypad to enter numbers and letters.
To enter letters using the keypad, use a corresponding number key. Press the
•
key one or more times to display a particular letter. For example, press the 2
key once for "a," twice quickly for "b," and three times quickly for "c." After
you pause, the cursor automatically advances to allow you to enter the next
letter.
To enter a period (for example, in an IP address), press the . (period) softkey
•
or press * on the keypad.
Press the << softkey if you make a mistake. This softkey deletes the character
•
to the left of the cursor.
• Press the Cancel softkey before pressing the Save softkey to discard any
changes that you have made.
Chapter 4 Configuring Settings on the Cisco IP Phone
OL-6966-01