Operation - Jensen VM8113 Installation And Operation Manual

VM8113

OPERATION

Power
Press the (power) button (1) to turn the unit on. Press and hold the power
button again to turn the unit off.
1
DISP
DIM
SRC PTY
BAND
iPod Menu
NOTE: LCD panels may take longer to respond when subjected to cold
temperatures for an extended period of time. In addition, the visibility
of the numbers on the LCD may decrease slightly. The LCD display
will return to normal when the temperature increases to a normal
range.
Source
Press the SRC button (6) repeatedly to scan the various sources. A source
is only displayed when accessible (optional equipment required for some
sources). Available modes include Radio (FM1, FM2, FM3, AM1, AM2),
DISC, SD, USB, and auxiliary (AUX IN).
External Devices
External peripheral devices, including a game console, camcorder,
navigation unit, iPod, Zune, etc. can be connected to the AUX IN connector
(18) on the front of this unit using the 3.5mm A/V Media Cable (included).
Select "SOURCE >> AUX IN" to access auxiliary devices. You cannot
directly control external devices connected to the AUX IN input.
Audio Mute
Press the (power) button (1) to silence the audio volume. "
on the display. Press again to restore volume to the previous setting.
Volume Control
To increase the volume, turn the VOL/SEL/MENU (rotary encoder) (2)
clockwise. To decrease the volume, turn the rotary encoder counter-
clockwise. When volume is adjusted, the volume level is shown on the
display panel as a number ranging from "0" (lowest) to "40" (highest).
Steering Wheel Control (SWC)
The VM8113 is compatible with the PAC (Pacific Accessory Corporation)
VM8113 INT
1 2
steering wheel control adapter SWI-PS. A 3.5mm female connector
RPT RDM
(labeled "SWC Interface") on the back of the head unit allows connectivity to
3
4
DN UP
the PAC adapter. Please refer to the instructions included with the PAC
5 6
adapter for detailed installation information.
18
A/V IN
SWC Functions
The following controls are available for most vehicles:
1. Vol Down
2. Vol Up
3. Mute
4. Seek Down / Previous Track / ** Preset Down
5. Seek Up / Next Track / ** Preset Up
6. SRC (Source)
7. ** Select
8. ** Select
9. Band
** If additional steering wheel control buttons are available on the vehicle,
function 7 / 8 may be assigned the "Select" feature. This feature / function
may not be available on some vehicles.
Select Operation
If "Select" (function 7 or 8) is held down and function 4 is pressed
momentarily, Preset Up is selected. If "Select" (function 7 or 8) is held down
and function 5 is pressed momentarily, Preset Down is selected.
Audio Menu
Press the VOL/SEL/MENU button (2) to access the audio menu. Press the
VOL/SEL/MENU button repeatedly to move through the list of menu
options.
NOTE: Audio settings only apply to the current source (Source Tone
" appears
Memory). You must make audio adjustments for another source when that
source is active.
5