Baumatic BL18A Instruction Manual page 24

10) Check that the fridge door is aligned horizontally
and vertically.
o Check that the door seals are sealing on all sides
o Tighten the hinge bracket screws.
o IMPORTANT: You must ensure that these screws are fully
tightened.
7) Turn the hinge over and place it on
the diagonally opposite corner of
the cabinet.
o Securely screw it into place.
8) Repeat steps 5 - 7 on the remaining
hinge (i.e. remove it and attach it to
the diagonally opposite corner).
o Replace the cabinet blanking
plates.
9) Carefully rehang the door.
o Shut the appliance door and then
close the hinges.
o Insert the screws on the outside
of the hinges.
of the appliance.
24