Adjusting The Height And Levelling Off Your Larder Fridge - Baumatic BL18A Instruction Manual

Adjusting the height and levelling off your larder fridge

2) Place the larder fridge into the aperture. The height and level of the
appliance should then be adjusted so it sits properly under the
worktop.
o Locate the 4 rotating, levelling feet on each corner of the
appliance.
o The appliance should be flush with the underside of the worktop
and be level.
IMPORTANT: If the appliance is not level, then the door and door seal
may be affected.
o Loosen the locking nut by turning it
clockwise using the spanner.
o Turn the foot to either raise or
lower the height of the larder
fridge.
o Fully tighten the locking nut on
each leg, against the underneath of
the larder fridge.
17