Baumatic BL18A Instruction Manual page 20

o Place the furniture door over the retaining bolts that you have
just secured.
o Adjust the level of the furniture door using the levelling nuts at
the bottom of the bolts.
o IMPORTANT: The furniture door should line up with the rest of
your cabinet doors.
o Mark the position of the holes in the centre of the fixing brackets
onto the furniture door and then remove the furniture door.
o Using a drill with a 3 mm drill bit; drill a hole on the two marks
that you have just made. The hole should be drilled to a depth of
5 – 8 mm.
8) Using the screws
provided, secure the front
brackets to the inside of the
furniture door on the holes
that you have just drilled.
IMPORTANT: These screws
must be securely tightened.
9) Tighten the upper
retaining bolts to the top of
the appliance door.
10) At the bottom of the
fridge door, there are two
holes. You should secure the
lower fixing brackets to these
holes using the screws
provided. The longer section
of the lower fixing bracket
should be connected to the
bottom of the fridge door.
20