Using Preset Stations - Jensen VM9022HD Installation And Operation Manual

screen without changing the station, touch Exit. To clear your
entry and start over, touch Clear.
HD Radio Multicast Channels
To tune to an HD Radio multicast channel, tune to the main
signal and then press the PROG button (20) on page 2/2 . If a
Multicast channel is being broadcast for the current station,
the corresponding multicasting number appears on the left
side of the screen. To view the title and artist, if available,
select HD-1, HD-2, HD3, etc.
FM 106.7 MHz HD-2
RADIO
WXXL-FM
Auto HD
E
HD-1
Q
HD-2
HD-3
PROG
Title: Lil Love
NOTE: The amount of information displayed when
receiving an HD Radio signal is dependent upon what is
being broadcast. Some stations broadcast their call
letters (name), the artist's name, song title, and category
of music.
PTY Search
After tuning to an HD Radio channel, the Program Type
categories are listed, allowing listeners to find similar
programming by genre.
FM 106.7 MHz HD-1
RADIO
WXXL-FM Auto HD
E
01 Non-specific
Q
02 News
03 Information
04 Sports
05 Talk
06 Rock
PROG
Title: DAWSON McALLIST
If the PTY menu is not displayed, press the PROG button
(20) on page 2/2 to toggle between HD Radio multicast
channels and PTY categories.
When a PTY category is selected from the touch screen
menu, the radio will start scanning for stations broadcasting
in the selected category.

Using Preset Stations

Six numbered preset buttons store and recall stations for
each band. All six stored stations (P1-P6) for the current
band appear on the screen.
02:27 AM
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen MEM button (17), on page 2/2 of
the onscreen options, to open the preset screen.
Preset: _ _
MEM
1
4
2/2 A/D
7
0
3. Touch the preset number in which you would like to
store the current station (or press EXIT to cancel and
close the menu). The preset number and station
appears highlighted.
NOTE: Multicast stations can be stored as preset
stations.
Recalling a Station
1. Select a band (if needed).
02:07 AM
2. Touch an on-screen preset button (6) to select the
corresponding stored station.
P1
P2
MEM
P3
P4
P5
2/2 A/D
P6
Auto Store (AS)
To select six strong stations and store them in the current
band:
1.
2.
The new stations replace stations already stored in that band.
2 3
Exit
5 6
8 9
Clear
87.5 MHz
90.1 MHz
98.1 MHz
106.1 MHz
107.9 MHz
102.9 MHz
20
VM9022HD
Select a band (if needed).
Press the AS button on the control panel (3) or on page
1/2 of the on-screen controls to activate the Auto Store
function.