SavingYourPresetStations; AutomaticScanAndStore - Jensen DMR2116i Owner's Manual

SavingYourPresetStations

There are six numbered preset buttons which can store and recall stations for each
band. While listening to a radio station you would like to save as a pre-set, press
and hold one of the buttons numbered 1-6 until you hear a beep. The button you
pressed is now the preset button for that station.

AutomaticScanandStore

The Automatic Memory Storing feature is most useful when travelling in an area
where you are not familiar with the local stations. The Auto-Store Tuning feature
will automatically scan and enter up to eighteen FM strong stations into the preset
memory locations for the FM1, FM2 and FM3 bands or twelve strong AM stations
into the preset memory locations for the AM1 and AM2 bands. Each band stores
up to six preset stations.
While listening to the FM radio, press and hold the AS button on the faceplate. The
receiver will automatically scan and save stations of the 3 FM bands.
While listening to the AM radio, press and hold the AS button on the faceplate.
The receiver will automatically scan and save stations of the 2 AM bands.
Note: If you have already set the preset memories to your favorite stations,
activating the Auto-Store feature will erase those stations and enter the new
strong stations.
24