Exiting The System Setup Menu - Jensen VM9022HD Installation And Operation Manual

Bluetooth Sub-menu Features
Setting Options Function
Bluetooth On Enable Bluetooth function.
Off Disable Bluetooth function.
Auto Answer On The unit automatically answers all
incoming calls.
Off Manually answer calls by touching
the "call" button.
Connect Manual Connect the last active mobile
phone by touching the CONNECT
icon when disconnected.
Auto Automatically connect when your
paired phone is in range.
Pairing Code The default code is "1234". Touch
the keypad icon to open the keypad
and enter the pairing code or pass
key required for Bluetooth connec-
tion to your mobile phone. Not all
phones/devices require a pairing
code. The default code is "0000" for
many models.
Tuner Region Sub-menu Features
Setting Options Function
Tuner Region 1 FM Band: 87.6MHz -
Region 107.9MHz, channel separation
UK @ 100kHz
Europe
Russia AM Band: 531kHz - 1602kHz,
Africa channel separation @ 9kHz
Region 2 FM Band: 87.9MHz -
107.9MHz, channel separation
USA @ 200kHz
Canada
Mexico AM Band: 530kHz - 1710kHz,
South channel separation @ 10kHz
America
Rating Sub-menu Features
The DVD system has a built-in parental lock feature to
prevent unauthorized persons from viewing restricted disc
content. By default, the rating system is set at the highest
setting (with no restrictions). The parental lock is released
only by entering the correct password. Once the password is
entered, rating is available for setup.
Setting Options Function
Password _ _ _ _ _ _ Enter the default six-digit password
(012345).
Setting Options Function
Rating 1. Kid Safe Select the appropriate rating level
for the intended audience.
2. G
You may override higher ratings by
3. PG
using your password.
4. PG-13
5. PG-R
6. R
7. NC-17
8. Adult
Load Factory Reset Select "Reset" to restore the factory
default settings for the Rating sys-
tem only.
To reset the password, access the "RATING" menu and enter
the current password. Once the correct password is entered,
you can access the "Password" field and enter a new one.
NOTE: Record the password and keep it in a safe place
for future reference. The rating for each disc is marked
on the disc, disc packing, or documentation. If the rating
is not available on the disc, the parental lock feature is
unavailable. Some discs restrict only portions of the disc
and the appropriate content will play. For details, please
refer to the disc description.
Demo Sub-Menu Features
You can stop/run demonstration mode or turn Demo Auto
Run on/off by chooing the "Demo" option from the SETUP
MENU.
When "Demo Auto Run" is Off, you can select "Demo Mode >
Run" to start Demo Mode. Demo Mode scrolls through the
various source screens, simulating activity on the display.
"Demo Mode" is discreetly displayed in yellow text (below the
clock), to indicate the unit is in Demo Mode. To stop Demo
Mode, press the upper-left quadrant of the TFT (Source
select).
When "Demo Auto Run" is On, the unit will automatically
display Demo Mode when powered on.
Hardware Sub-menu Features
If the rear-view video camera is connected, the unit is on, and
the TFT monitor is retracted inside the unit, the TFT monitor
automatically moves into the viewing position and Camera
mode is selected upon shifting into REVERSE gear. When
shifting into DRIVE gear, the TFT monitor is retracted back
inside unit after ten seconds.
18
VM9022HD
Setting Options Function
Camera Normal
Mirror Reverse the camera image as if
looking through a rear-view mirror.
TFT Set Auto The TFT panel automatically
Open retracts when turned off and
resumes its previous angle when
the unit is turned back on.
Manual The TFT panel maintains its angle
adjustment setting when the radio is
turned on/off.
Off The TFT panel automatically
retracts when turned off and DOES
NOT resume its previous angle
when the unit is turned back on.
If the monitor is in display mode, the monitor automatically
switches to CAMERA mode upon reverse driving. When the
reverse driving stops, the monitor return to its original input
mode.
P.VOL Sub-menu Features
Setting Options Function
Source DISC Choose a source for which you
would like to increase the relative
RADIO
volume (LEVEL).
SD
Use the +/- buttons to increase or
decrease the relative volume for the
SAT
specified source up to 6 decibels.
AUX 1
USB
BT
AUX 2
iPod
NAV
TS Cal (Screen Calibration)
To access the "Screen Calibration" function from the SETUP
menu, select the "TS CAL" option.
After entering calibration mode, a crosshair
quadrant of the screen. To begin calibration, press and hold the
crosshair for one second until it moves to the next quadrant.
Continue for each quadrant until the calibration is completed.
To exit without performing calibration, touch the BACK
button.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the
SETUP button (31) on the remote control or touch the BACK
button on the screen.
appears in a corner