Roland V-4EX Owner's Manual page 42

Menu Operations and Menu List
CH 4 ADJUST Menu
You can set the following items for input on channel 4 only.
However, it's not possible to adjust values below for composite input of CH 4.
H.POSITION -200 - [0] - 500
V.POSITION -200 - [0] - 500
H.SIZE [100.0%] - 150.0%
V.SIZE [100.0%] - 150.0%
CONTRAST 0 - [64] - 127
BRIGHTNESS 0 - [78] - 127
SHARPNESS [0] - 127
FLICK FILTER 0 - [7] - 10
COLOR 0 - [64] - 127
[AUTO], 480/576i, 480/576p,
720p, 1080i, 1080p, 640x480,
800x600, 1024x768, 1280x768,
INPUT RESOLUTION
1280x1024, 1366x768,
1400x1050, 1600x1200,
1920x1200
* The valid setting range of H.POSITION and V.POSITION differs depending of the input resolution. In the invalid range, changing of the value does
not alter the image position.
MEMORY Menu
COPY MEMORY Current No. ->[2] - 8
EXCHANGE
Current No. ->[2] - 8
MEMORY
MEMORY PROTECT [OFF], ON
MIDI Menu
For information about operating the unit by remote control using MIDI, download "Remote Control Guide" from the following
Roland website.
http://www.rolandsystemsgroup.net/
42
This adjusts the display position in the horizontal direction.
This adjusts the display position in the vertical direction.
This adjusts the size in the horizontal direction.
This adjusts the size in the vertical direction.
This adjusts the contrast.
This adjusts the brightness.
This adjusts the sharpness of outlines.
This adjusts the degree of flicker reduction. The flicker filter works to blur or equalize the
brightness differences between scanning lines.
This adjusts the color.
This sets the input resolution. This setting is effective when the input setting for channel 4 is
HDMI or RGB/COMPONENT.
This copies the data at the current memory number to a different number.
This exchanges the data at the current memory number with the data at another number.
This protects the data at the current memory number.