IMPLEMENTATION GUIDE -6rd Configuration Guide
10) CLI Syntax: show services softwire flows v6rd initiator<initiator ip>concentrator<concentrator ip>
Description: This CLI will filter out flows from CLI "show softwire services flows" based on both specified v6rd initiator
ip and concentrator ip.
Example:
regress@ billiard # run show services softwire flows v6rd initiator 3.3.3.3
concentrator
11) CLI Syntax: show services softwire flows v6rd concentrator<concentrator ip>initiator<initiator ip>
Description: This CLI will filter out flows from CLI "show softwire services flows" based on both specified v6rd initiator
ip and concentrator ip.
Example:
regress@ billiard # run show services softwire flows v6rd concentrator 2.2.2.2
initiator 3.3.3.3
Router CONFIG :
===============
interfaces {
sp-0/0/0 {
32
2.2.2.2
Figure 3: Topology used to illustrate CLI commands for 6rd deployment and operations
services-options {
inactive: syslog {
host local {
services any;
}
}
}
unit 0 {
Copyright © 2011, Juniper Networks, Inc.