U
F
340C >
U
SING THE
ISHFINDER
System Tab
The System tab enables you to control various system and interface
settings.
The following settings are available:
• Beeper—controls all sounds. Select from Off, Alarms Only
(sounds for alarms/messages), or Key and Alarm (sounds
for key presses and alarms/messages).
• Language—select from various languages for the
Fishfinder's on-screen display.
• System Mode—lets you simulate Fishfinder operation. If
the Fishfinder does not detect a transducer, it automatically
enters Simulator mode.
32
M
M
SING THE
AIN
ENU
• NMEA Input/Output—controls the input and output of
NMEA 0183 version 3.01 data to and from the Fishfinder.
This setting must be On to receive GPS navigational data
and send Sonar NMEA data. See
available NMEA sentences.
• Factory Settings—restores all settings to the original factory
default values. The Fishfinder 340C turns off and back on
again when you select Yes.
• Software Version—shows the Fishfinder's software version,
copyright date, and unit ID.
• Reset Odometer—this option appears only if you are using
a speed-capable transducer/sensor. This resets the odometer
field to zero.
page 16
for details on
Fishfinder 340C Owner's Manual