Table of Contents
Advertisement
Automatically Turning Off the System
You can set the chartplotter and the whole system to turn off automatically after it has been asleep for the
selected length of time. Otherwise, you must press and hold
1 Select Settings > System > Auto Power Off.
2 Select an option.
Customizing Pages
Customizing the Startup Screen
You can personalize the image that is displayed when the chartplotter is turning on. For the best fit, the
image should be 50 MB or less and conform to the recommended dimensions
Dimensions,
page 8).
1 Insert a memory card that contains the image you want to use.
2 Select Settings > System > Sounds and Display > Startup Image > Select Image.
3 Select the memory card slot.
4 Select the image.
5 Select Set as Startup Image.
The new image is shown when turning on the chartplotter.
Recommended Startup Image Dimensions
For the best fit for the startup images, use an image that has the following dimensions, in pixels.
Display resolution
WXGA
Customizing the Layout of a Combination Page
You can customize the layout and data shown in the combination pages.
1 Open a combination page to customize.
2 Select
> Edit Combo.
3 Select an option:
• To change the name, select Name, enter a new name, and select Done.
• To change the number of functions shown and the layout of the screen, select Layout, and select an
option.
• To change the function of a portion of the screen, select the window to change, and select a function from
the list on the right.
• To change how the screens are split, drag the arrows to a new location.
• To change the data shown on the page and additional data bars, select Overlays, and select an option.
TIP: While viewing a screen with data overlay, hold an overlay box to quickly change the data in it.
8
to turn off the system manually.
Image width
1080
(Recommended Startup Image
Image height
350
Customizing the Chartplotter
Advertisement
Table of Contents
Troubleshooting
