Digital Zoom; Sequencing - Digimerge DH200+R Series Instruction Manual

Digital Zoom

You can activate Digital Zoom in live view and
playback. You can zoom in on a single channel or a
split-screen view.
To use Digital Zoom:
1. Click .
• Click + / - or use the mouse wheel to zoom in
and out.
• Click the arrows to move the zoom area.
• Press the button below the zoom controls to
restore the default view.
• Click again to exit Digital Zoom and
restore the default view.

Sequencing

If you monitor multiple DVRs, you can have each tab change continuously. This process is called
sequencing. You can perform sequencing as long as you have two or more DVRs. Virtual DVR's
work with sequencing as well.
Prerequisite
• Log in to two or more DVRs.
To start a sequence:
• Click the Sequence button (
NOTE: To change the sequence time, click File>Setup. Under "Miscellaneous", enter the
desired sequence time in seconds, and click Ok.
80
).
The two DVR tabs will continually switch between eachother
Move zoom
area
Zoom out
Restore default view
Sequence button
Zoom in