Table of Contents
Advertisement
Objects (min. 150 x 150 mm) are detected up to a distance of 15 m (corresponds to
the warning zone) and signaled by way of a non-safety-related semiconductor output.
Four programmable zone pairs (each of which consists of one detection zone and one
warning zone) enable the scanner to be optimally adapted to the needs of each
particular application.
The SIMATIC FS600 Laser Scanner can be implemented not only on machines and
systems (stationary safeguarding of danger zones), but also on vehicles (mobile
safeguarding of transport vehicles).
Due to its wide range of measurement and its non-contact, electro-sensitive
measurement principle,
the SIMATIC FS600 Laser Scanner can be effectively used as a protective device for
virtually any application.
2.2
Special Features of the SIMATIC FS600 Laser Scanner
•
Four / eight freely programmable detection zones (up to a maximum of 4 m)
•
Four / eight freely programmable warning zones (up to a maximum of 15 m)
•
Expanded monitoring range of up to 190 °
•
ConfigPlug see Chapter 10.5 for easy device swap-out without configuration
expense
•
Compact design (W x D x H: 140 mm x 135 mm x 155 mm)
•
Low weight (2 kg)
•
Low power requirements (300 mA, plus the load at the outputs)
•
Two types of interfaces at one Sub-D jack (RS232 and RS422)
•
User-friendly software
15
Advertisement
Table of Contents
